dr inż. Hubert Byliński | Politechnika Gdańska

Treść strony

dr inż. Hubert Byliński

Kontakt:

email:
hubert.bylinski@pg.edu.pl
strona:
https://mostwiedzy.pl/hubert-bylinski,685043-1

Zajmowane stanowiska:

Adiunkt

miejsce pracy:
Katedra Konstrukcji Inżynierskich
Budynek A Wydziału Inżynierii Lądowej i Środowiska-Żelbet, 110
telefon:
+48 58 347 1664
dr inż. Hubert Byliński

Publikacje:

  1. Publikacja

    This research analyses the behavior of corrosion, durability, and quality of reinforced concrete samples coated with two different materials when exposed to contaminated soil with sulfates. The initial assessment involved evaluating the water absorption rate of the coating materials before and after exposure to a solution containing 3%푁푎2푆푂4+3%푀푔푆푂4+3%퐾2푆푂4+3%퐶푎푆푂4to determine their durability. the corrosion...

    Pełny tekst do pobrania w serwisie zewnętrznym

  2. Anaerobic digestion (AD) is implemented as an important ‘waste to energy’ approach for converting organic-rich byproducts such as sewage sludge into biogas and nutrient-rich digestate. Sewage sludge consists of primary sludge and waste activated sludge (WAS), and low biodegradability of WAS limits methane production. This study presents the influence of the low-temperature pretreatment (LT-PT) of WAS on the efficiency of AD. Different...

    Pełny tekst do pobrania w serwisie zewnętrznym

  3. This study assesses the durability of coated and uncoated concrete surfaces protected with four Different coating materials: water-soluble (BW), solvent-based (BR), mineral (MI), and epoxy (EP). The durability assessment includes evaluating the absorption rate of water, pull-of adhesion strength, and coating material thickness. Concrete samples were subjected to immersion in regular water and a 7% urea solution, followed by cyclic...

    Pełny tekst do pobrania w portalu

  4. This paper assesses the behavior of mineral, epoxy (EP), solvent, and water-soluble coatings when exposed to salt and regular water for 28 days. Also, it evaluates the pull-off adhesion strength of the same coating materials applied to concrete slabs saturated with oil and water and dried with two different processes: air-dried for 28 days and air-dried for 14 days plus 14 days in the oven at 70 °C. Properties such as carbonation,...

    Pełny tekst do pobrania w portalu

  5. Publikacja

    - ENERGIES - Rok 2022

    : Innovative low-temperature disintegration (process temperature 55 ◦C and oxygen concentration 0.2 mg/dm3 ) can be an economically rational technology to intensifying energy production from renewable sources. The proposed process can achieve a degree of disintegration—under optimal conditions—of about 50%, which is excellent when compared with other methods of feed pre-treatment. The low-temperature disintegration of distillation...

    Pełny tekst do pobrania w portalu

dane pochodzą z portalu MOST Wiedzy otwiera się w nowej karcie MOST Wiedzy

Projekty: