mgr inż. Tomasz Żochowski | Politechnika Gdańska

The measurement of dimples created on the inner bushing surface is a key step in the quality assessment of the textured bearings, because of their substantial effect on the bearing performance. The aim of this study was the complex analysis of the surface topography of textured inner bushing surface with application of the newly designed and built instrument for 360 degrees surface topography measurements. In the article the theoretical models...

Increasingly stringent requirements for the durability and reliability of ship components and new standards for environmental protection have resulted in the use of increasingly sophisticated technologies in the shipbuilding industry. The components of a ship’s propulsion system have been meticulously analysed and improved over several decades. The durability and reliability of the sliding bearings for a ship’s propeller shaft...

The main purpose of the research was to determine the possibilities and experimentally test the benefits of replacing conventional oil lubrication with ecological water lubrication. Tests were carried out on a test rig for hydrodynamic radial bearings under conditions representative of the expected applications for the bearing in water turbines. Bearings made from the polymer material PEEK (polyether ether ketone) were tested under static...

Selecting the appropriate bearing system for the rotor requires a good knowledge of the available solutions and the operating conditions of the machine. For newly designed machinery operating in adverse conditions, selecting bearings that ensure correct and long-lasting operation can be extremely challenging. Difficulties in- crease when the machine’s operating parameters are beyond the technical capabilities of available technical solutions....

The article presents selected characteristics of journal bearings calculated with the use of various methods and compared to the results obtained with application of the basic bearing characteristics calculation procedure, as described in the ISO 7902:2020 standard. Additionally, the presented calculation results were compared with the parameters measured during experimental tests of the sliding bearings, working under loads and...